Summit SPW1103ADA - Manual (Page 13)

188635
- Open the door of the machine.
Door is opened by pulling the handle (lever) on
the right hand side of the door towards you.
- Sort the laundry by the type of fabric.
Fasten buttons and zippers, tie any strings
and pull out the pockets.
Very delicate laundry should be put in a
special protective sack.
It is recommended to load the drum with
items of different sizes.
Pay attention to the labels on the clothes,
indicating the recommended washing mode
(see table of textile treatment symbols on the
last page of these instructions).
- Load the laundry into the drum.
- Close the door of the appliance.
- Open the water inlet faucet.
- Push the Start/Pause button and select washing
program.
Program is selected by turning the program selector
(A) from the “0” position to the desired washing
program. The Start/Pause signal LED starts
flashing. The program selector (A) may be turned
in both directions. Choose the appropriate program
according to the type of laundry and desired
temperature. For example, cottons and 95°C (Refer
to the Program Chart on page 7). You may select
basic or partial programs.
Selected program may be changed at random prior
pushing the START button (C).
- Selection of basic programs
Basic programs include all washing stages, softening
and spinning (see Program Chart). They are selected
by turning the program selector to the appropriate
position, including temperature selection.
13
Washing machine
operation