Summit SPW1103ADA - Manual (Page 15)

188635
•
The selected program is completed by pushing
the START button (C), but you may also apply
additional programs (pumping or spinning), but
you must first return the program selector to the
“0” position for at least one second, prior selecting
any of the additional programs.
When program continues, indicator LED above
the knob goes off.
- Selection of partial programs
These are independent programs and may be used
when you do not need the entire washing program.
In case you would like to use more additional
programs in a sequence, you must turn off the
appliance prior to any new program selection (turn
the program selector (A) to “0” for at least one
second). Refer to Program Chart page 7.
Rinse
This program is intended for softening or bleaching
washed laundry. It finishes with spinning at 1000
RPM.
Conditioning
Independent program for rinsing delicate laundry,
without intermediate spinning and with short final
spin. You may use it for rinsing manually washed
delicate laundry or for extra rinsing for people with
skin sensitive to detergents.
Drain
Use it when the washing program was interrupted
or if rinse hold function was engaged, and you only
wish to pump the water out of the drum, without
spinning.
Spin
Aggressive spinning for non-delicate laundry at high
spin RPM.
15