Summit SPW1103ADA - Manual (Page 8)

188635
When removing the wrapping be careful not
to damage the appliance with a sharp object.
Before connecting the appliance, let it warm
up to room temperature (wait for two hours).
•
Our appliances are packed in environmentally
friendly materials which may be recycled,
deposited or decomposed without any threat to
the environment.
•
To this end all packaging is marked accordingly.
•
Move the hoses to allow access to the transport
brackets.
•
Loosen screws A at the rear of the machine
(Fig. 1).
•
Remove the brackets B (Fig. 1) by sliding them off
the shipping rod (Fig. 1).
•
Use the brackets to remove the shipping rods by
inserting the notched end of the bracket around
the shipping rod (Fig. ).
•
Rotate the bracket 90° in an upward motion to
release the shipping rod (Fig. ).
•
Pull the shipping rod out.
•
Save bracket and rods for later use.
Be sure to remove the transport brackets
prior to use, otherwise the appliance may
be permanently damaged. In such cases
the warranty conditions are void.
Fig. 1
Fig. 
Fig. 
8
Installation and connection
Package removal
Removal of transport
brackets and shipping
rods