Summit SPW1103ADA - Manual (Page 26)

188635
* UKS: universal stability control - this function prevents excessive vibrations during spinning.
6
Failure Possible cause Remedy
Laundry is stained
after washing.
You used liquid detergent or
detergent for colored laundry
which does not contain whitener.
Use the detergent containing
whitener.
White powdery
residues on the
laundry.
It is not the consequence of bad
rinsing, but because of neo-
phosphate detergents containing
non soluble components
(zeolites) for water softening.
Such substances may be
deposited upon the laundry.
Immediately rinse the laundry once
again.
• Use liquid detergents which do not
contain zeolites.
• Try removing the residues with the
brush.
Detergent residues in
the dispenser.
Low water flow pressure.
Some detergents may stick to
the dispenser rather hard if it is
wet.
• Clean the inlet hose filter screen.
• In case of low water pressure
increase water level.
• Wipe the dispenser prior loading
detergent.
Softener is not
completely rinsed,
or water is left in the
dispenser dish.
Syphon cover is not correctly
positioned or is clogged.
Clean the dispenser and firmly fix the
cover to its place.
Unpleasant smell in the
washing machine drum.
• Remains of fabrics, washing
agent and softener in the filter.
• Development of germs
• Check whether the filter is clean.
• Run the Cotton 95°C program
without any laundry, using a powder
detergent.
Washing time is
longer than usual.
• The machine switched on
the UKS* system because of
uneven laundry load.
• Power failure occurred.
• Washing program time may be up to
60% longer; however, this does not
imply a fault in the machine.
• Time is prolonged for the power
failure period.