Summit SPW1103ADA User Manual

Page 25

Advertising
background image

188635

5

Failure

Possible cause

Remedy

The machine does not

work (symbols are not

illuminated).

Machine is not powered.

Check if:

• power in the socket,

• the fuse is OK,

• plug is in the socket.

Washing program

does not start

(Start/Pause LED is

flashing).

Door is not properly closed.

Close door firmly.

Water does not enter the

machine (after approx. 4

min the machine reports

failure -3 flashes).

Water inlet failure.

Check if:

the water faucet is open,

inlet hose screen filter is clean.

Push the START button.

Water is leaking from

the machine.

Filter is not tightly screwed in.

Inlet pipe is not tightly screwed to

the machine or to the water faucet.

Outlet hose fell to the floor.

Tighten the filter properly.

Tighten the inlet pipe.

Affix the outlet pipe to the drain.

The machine moves

during operation.

The machine is not properly

leveled.

Transport brackets and shipping

rods are not removed.

Level the machine with the adjustable

legs.

Remove transport brackets and

shipping rods.

The machine vibrates

during the spin.

Unevenly distributed laundry,

especially with very small

quantities (for ex. only the

bathrobe).

This is normal, the machine will

reduce the RPM if vibrations are too

strong.

Wash larger quantity of laundry.

Excessive foaming

during washing.

Excessive measure of detergent. Use detergent according to the

instructions by the producer and

according to the water hardness and

soiled laundry. Use only detergents

• for machine washing

• use “HE” detergent.

Water is poorly

pumped out or not at

all (machine reports

failure - seven flashes

of LED).

Water outlet is clogged.

Check if:

the filter is clean,

outlet hose is not jammed,

outlet hose is positioned higher than

1m.

Push START again.

Laundry is not

properly spun.

No failure is reported.

The machine switched on the

UKS function. Because of bad

laundry balance, the machine

has automatically reduced spin

RPM.

The machine operates normally.

Wash large and small pieces of

laundry together.

Greasy wads appear

on the laundry.

Too little detergent (laundry was

very greasy).

Wash the laundry again.

Add more detergent for such soiled

laundry, or use liquid detergent.

Advertising