Talos Security DR800 Series DVR User Manual - Manual (Page 17)

H.264 Network DVR
- 17 -
If a hard drive has not been installed you will receive a prompt as below: (Figure 3-1)
Figure 3-1
3.1.3 Shut down
Correct Shut Down:
A. Press and hold the POWER button approximately 3 seconds then confirm shut down of the system; this will stop all the functions of the DVR.
(Figure 3-2)
Figure 3-2
B. Enter into the menu and select “Shutdown System” in exit system menu. (Figure 3-3)