Chapter.10 faq – Talos Security DR800 Series DVR User Manual User Manual
Page 81
H.264 Network DVR
- 81 -
CHAPTER.10 FAQ
C
onnected to the power, the machine didn’t start running
1. Check whether the power switch is turned on.
2. Check whether the adapter is plugged in and connected to the DVR.
Hanging at the boot screen
1. The hard disk may have physical damage.
2. The system guide is un-normal.
Starting very slow
1. A hard disc error can cause the mother board to check the hard disk repeatedly.
Host restart repeatedly
1. Please check the host power supply; if multiple hard disks are connected there may be inadequate power.
2. Unplug the network cable and check if the system operates run normally; a serious network failure may cause the host to restart repeatedly.
Hanging video
1. Check the hard disk connection or replace a defective hard disk.
2. Check the operating temperature of the DVR.
3. Check the current capacity of the electrical circuit for high-current devices.