Talos Security DR800 Series DVR User Manual - Manual (Page 41)

H.264 Network DVR
- 41 -
6.2 Encoding Setup
"Main Menu" - "System Setup" - "Encoding Setup". (Figure 6-3)
Figure 6-3
"Channel" Choose the channel to setup, ALL applies the same setup to all channels.
"Encode Type" Two options; “Audio&Video” stream or “Video” stream only.
"Encode Size" CIF, HD1, D1.
"Stream Control" Two options; "variable rate" and "fixed rate".
"Encode Quality" Six options for picture quality; best, very good, good, general, poor, low.
"Stream Rate" Encode rate options; the higher the rate, the higher the picture quality and the more HDD space is used.
"Frame Rate" 1 ~25/seconds (PAL) or 1~30/seconds (NTSC) continuously adjustable.
"Time Display", "Title Display" Superimpose time and channel label over each camera. Click “Setup” and drag the time or channel title into position.
"Copy setting to the following channel" Copy the setup to all channels using the same encoding setup.
Note: When the code flow control is set to dynamic bit-rate, Stream Rate displays the upper limit value.