Talos Security DR800 Series DVR User Manual - Manual (Page 45)

H.264 Network DVR
- 45 -
Note: After PPPoE dial up successful, user may visit the DVR remotely according to PPPoE IP displayed IP address, In local area network,
can visit the DVR through the network card.
Figure 6-7A
6.5.1Email Function Setup (Figure 6-7A)
"Mail Server" Enter the e-mail service provider server address. Example: smtp.gmail.com
"Sender Address" Enter the sender address. Example [email protected]
"Sender User Name" Enter the sender user name; should correspond to the mail address. Example: yourname
"Sender Password" Enter the password used to send e-mail.
"Confirm Password" Confirm the password used to send e-mail
"Receiver Address" Enter the address to which an e-mail notification will be sent. Example
[email protected]
An e-mail will be sent when an alarm recording is triggered (external trigger or video motion must be enabled).
"E-mail Test" Press to send a test e-mail notification.
NOTE: Your sender mailbox must support SMTP function