1606-rm013a-en-p, Intended use – Rockwell Automation 1606-XL240-UPSE Power Supply Reference Manual User Manual
Page 3
All parameters are specified at an input voltage of 24V, 10A output load, 25°C ambient and after a 5 minutes run-in time unless noted otherwise.
It is assumed that the input power source can deliver a sufficient output current.
Rockwell Automation Publication 1606-RM013A-EN-P — March 2014
3
Bulletin 1606 Switched Mode Power Supplies
Intended Use
• This device may only be installed and put into operation by qualified personnel.
• This device is designed for installation in an enclosure and is intended for the general professional use such as in industrial control, office,
communication, and instrumentation equipment.
• Do not use this power supply in aircraft, trains, nuclear equipment or similar systems where malfunction may cause severe personal injury or
threaten human life.