Run system tests, Figure 29 - system tests, Diagnostics mode – Rockwell Automation 1608M MegaDySC User Manual, 208 Volt, One Second Extended Runt User Manual
Page 40: Run system tests diagnostics mode
Advertising
40
Rockwell Automation Publication 1608M-UM004A-EN-P - April 2014
Chapter 6
Display Screen
Run System Tests
Press the “RUN SYSTEM TESTS” to enter the “System Tests” screen. Press “2
MINS” to run the system fans for 2 minutes (See
).
Figure 29 - System Tests
Diagnostics Mode
This is not a user function. It is numerical code protected for authorized service
personnel.
Advertising