Rockwell Automation 1441-DYN25-MBMP Bump Test Extension Module for the Dynamix 2500 - Manual (Page 10)

10 Rockwell Automation Publication 1441-UM002A-EN-P - May 2011
Chapter 1 Installing Optional Extension Modules
Uninstall Extension
Modules Follow these instructions to uninstall an extension module.
1. Press 0 (Shift) from the Setup Utility screen to display the Extension
Manager function.
The Extension Manager function remains on the screen for about three
seconds after releasing the 0 (Shift).
2. Press F1 (Extn Mgr).
The Extension Manager screen appears.
3. Select the extension module you want to uninstall and press F3 (Select).
F3 (Select) toggles the selection on and off.
Extension Manager
This screen lists the
extension modules
currently installed and the
on the unit.