Rockwell Automation 1441-DYN25-MBMP Bump Test Extension Module for the Dynamix 2500 - Manual (Page 22)

22 Rockwell Automation Publication 1441-UM002A-EN-P - May 2011
Chapter 2 Bump Test Extension Module
The Bump Test screen appears.
4. Select Recall and press Enter.
The Bump Test - Load Setup screen appears.
5. Select the filename (test settings) that you want to recall (reload) and press
F3 (Open).
The Bump Test - Setup screen appears.
6. You can edit the settings or start collecting more data.
See Set Up Bump Test Measurements on page 16 .