Rockwell Automation 1441-DYN25-MBMP Bump Test Extension Module for the Dynamix 2500 - Manual (Page 11)

Rockwell Automation Publication 1441-UM002A-EN-P - May 2011 11
Installing Optional Extension Modules Chapter 1
A checkmark appears next to that extension module.
4. Press F1 (Uninstall).
A confirmation message appears.
5. Make sure your installation card is inserted into the instrument.
6. Press F2 (Yes) to uninstall the extension module.
7. Press F4 (Esc) to exit the Extension Manager screen.
IMPORTANT The extension module is uninstalled and the license on the card is
released so that the card can be used to install the extension
module on another Dynamix 2500 data collector.
If the installation card is not inserted in the data collector and no
card is found or the card does not have the extension module
license for the unit, you are prompted to insert the correct
installation card or continue without freeing the license.