Rockwell Automation 1441-DYN25-MBMP Bump Test Extension Module for the Dynamix 2500 - Manual (Page 23)

Rockwell Automation Publication 1441-UM002A-EN-P - May 2011 23
Bump Test Extension Module Chapter 2
Review Bump Test
Measurements You can review previously recorded measurements with the Dynamix 2500 data
collector.
1. Select Review Data on the Bump Test screen and press Enter.
The Bump Test - Review Data screen appears.
2. Select a measurement for review and press F3 (Open).
The measurement appears.
3. Press F2 (Prev) and F3 (Next) to display the previous or next
measurement.
4. Press F1 (Print) if you what to create a .bmp file that is stored on the SD
storage card or internally.