Rockwell Automation 1441-DYN25-MBMP Bump Test Extension Module for the Dynamix 2500 - Manual (Page 26)

26 Rockwell Automation Publication 1441-UM002A-EN-P - May 2011
Chapter 2 Bump Test Extension Module
Back Up Your files Follow these instructions to back up data to an SD storage card.
1. Insert an SD storage card into the instrument.
2. From the Bump Test - Review Data screen, use the Up and Down arrows to
select a measurement for backup, or select the – all – option to back up all
measurments.
3. Press 0 (Shift).
The Backup function appears.
4. Press F1 (Backup).
IMPORTANT The back up option can erase existing files on the SD storage device. It is
recommend that a blank SD card is used for backing up your files.
The SD storage card should not be disconnected in hazardous areas. It
must be connected and disconnected only in a safe area.