Recall a setup – Rockwell Automation 1441-DYN25-MBMP Bump Test Extension Module for the Dynamix 2500 User Manual
Page 21
Rockwell Automation Publication 1441-UM002A-EN-P - May 2011
21
Bump Test Extension Module Chapter 2
3.
Select save reading as and press F3 (Save).
4.
Enter a file name by using the keypad or accept the default file name
(current date timestamp).
If you want to overwrite an existing file, select the file and press F3 (Save)
and you will have the option to replace the file with the new one, such as
adding the machine name in front of the timestamp.
5.
When the entry is complete, press F2 (OK).
Recall a Setup
You can recall a previously saved setup and use it to record another measurement.
The setup may have been saved only as a setup, or may have been saved with the
recorded data.
Save a Bump Test Setup and Measurement on page 20
Follow these instructions to recall a Bump Test setup.
1.
Connect the transducer to the Dynamix 2500 data collector.
2.
Attach the transducer to the machine case or structure.
3.
Select Bump Test on the Main Menu and press Enter.
TIP
The setup parameters are saved along with the measurement
when you press F2 (Save) on the Bump Test - Save Data screen.