Rockwell Automation 1756-RIO ControlLogix Remote I/O (RIO) Communication Interface Module Installation Instr - Manual (Page 24)

24 ControlLogix Remote I/O (RIO) Module
Rockwell Automation Publication 1756-IN610B-EN-P - November 2010
Replacing the Module
If you are replacing an existing module with an identical one, and you want to
resume identical system operation, you must do the following:
• Install the new module in the same slot.
• Run the configuration program and download the appropriate
configuration to the module.
• Check that the module has the correct firmware, scanner, or adapter
version.