Baracoda BCM 2604 - Manual (Page 12)

2.12 No Read
With No Read turned On, the Imager notifies you if a code cannot be read. If using a Quick*View
Scan Data Window, an “NR” appears when a code cannot be read. If No Read is turned Off, the
“NR” will not appear.
If you want a different notation than “NR,” for example, “Error,” or “Bad Code,” you can edit the
output message using the Data Formatter. The hex code for the No Read symbol is 9C.
2.13 Print Weight
Print Weight is used to adjust the way the imager reads Matrix symbols. If a imager will be seeing
consistently heavily printed matrix symbols, then a print weight of 6 may improve the reading
performance. For consistently light printing, a print weight of 2 may help. After scanning the Set Print
Weight bar code, set the print weight (from 1-7) by scanning digits from the inside back cover, then
scanning Save. Default = 4.
2.14 Video Reverse
Video Reverse is used to allow the imager to read bar codes that are inverted. The “Off” bar code
below is an example of this type of bar code. If additional menuing is required, Video Reverse must be
disabled to read the menu bar codes and then re-enabled after menuing is completed.
Note: Images downloaded from the unit will not be reversed. This is a setting for decoding only.
11
On
* Off