Baracoda BCM 2604 - Manual (Page 29)

3.15.1 EAN/JAN-13 Check Digit
This selection allows you to specify whether the check digit should be transmitted at the end of the
scanned data or not. Default = On.
3.15.2 EAN/JAN-13 Addenda
This selection adds 2 or 5 digits to the end of all scanned EAN/JAN-13 data. Default = Off for both 2
Digit and 5 Digit Addenda
2 Digit Addenda On
* 2 Digit Addenda Off
* 5 Digit Addenda Off
3.15.3 EAN/JAN-13 Addenda Required
When Addenda Required is set to on, the imager will only read EAN/JAN-13 bar codes that have
addenda. Default = Not Required
3.15.4 EAN/JAN-13 Addenda Separator
When this feature is on, there is a space between the data from the bar code and the data from the
addenda. When turned off, there is no space. Default = On.
On
Off
Note: If you want to enable or disable EAN13 with Extended Coupon Code, refer to UPC-A/EAN-13 with Extended
Coupon Code (page 8-21).
28
* Not Required
Required