Baracoda BCM 2604 - Manual (Page 34)

You have to have PosiCode A and B on to read any of the PosiCode symbologies.
A and B Limited B On (Limited A Off)
3.20.2 PosiCode Message Length
Scan the bar codes below to change the message length. Refer to Message Length Description
(chapt 3.2) for additional information. Minimum and Maximum lengths = 2-80. Minimum Default = 4,
Maximum Default = 48.
Minimum Message Length
Maximum Message Length
3.21 Trioptic Code
Note: If you are going to scan Code 32 Pharmaceutical codes Trioptic Code must be off. Trioptic Code is used for
labeling magnetic storage media.
3.22 Codablock F
<Default All Codablock F Settings>
3.22.1 Codablock F Message Length
Scan the bar codes below to change the message length. Refer to Message Length Description
(chapt 3.2) for additional information. Minimum and Maximum lengths = 1-2048. Minimum Default =
1, Maximum Default=2048.
33
On
* Off
On
* Off