Rockwell Automation 1756-NEX Nexus Module - Manual (Page 38)

4-4 Configure the 1756-CLX/C Module
Publication 1756-UM524B-EN-P - December 2008
After you name the page, this screen appears
Click here to move to the next page
Click here to move to the next page
This screen is used
during online
monitoring but not initial
configuration
If you want a Major
Fault on the Controller
to occur if there is
connection failure with
the I/O module, click
here
This Fault box is empty when you are
offline. If a fault occurs while the
module is online, the type of fault will
be displayed here
Inhibit the connection to
the module here Adjust the Requested
Packet Interval here.
The default RPI is 5ms.