Rockwell Automation 1756-NEX Nexus Module - Manual (Page 39)

Configure the 1756-CLX/C Module 4-5
Publication 1756-UM524B-EN-P - December 2008
View and Change Module Tags
When you create a module, a set of tags are created by the ControlLogix system that can
be viewed in the Tag Editor of RSLogix 5000. Each configurable feature on your module
has a distinct tag that can be used in the processor’s ladder logic.
You can access a module’s tags through RSLogix 5000 as shown below.
You can view the tags from here
Because the process of viewing and changing a module’s configuration tags is broader in
scope than can be addressed in this chapter, refer to Appendix D for more information and
sample tag collections.
1. Select Controller Tags.
2. Click on the right mouse
button to display the menu.
3. Select Monitor Tags.
Click on the slot number of
the module you want to see