Rockwell Automation 1734-8CFGDLX POINT I/O Module with 8 Configurable 24V DC Points and DeviceLogix IN - Manual (Page 7)

POINT I/O Module with 8 Configurable 24V DC Points and DeviceLogix 7
Publication 1734-IN039A-EN-P - March 2009
Install the Module
The module can be installed before, or after base installation. Make sure the
mounting base is correctly keyed before installing the module into the
mounting base. In addition, make sure the mounting base locking screw is
positioned horizontal referenced to the base.
1734-TB Base
Be sure the DIN-rail
locking screw is in the
horizontal position.
Turn the keyswitch to align
the number with the notch.
Notch position 1 is shown.
44715
44710