Rockwell Automation 1734-8CFGDLX POINT I/O Module with 8 Configurable 24V DC Points and DeviceLogix IN - Manual (Page 8)

8 POINT I/O Module with 8 Configurable 24V DC Points and DeviceLogix
Publication 1734-IN039A-EN-P - March 2009
1734-TOP Base
Follow these steps to install the module.
1. Use a bladed screwdriver to rotate the keyswitch on the mounting
base clockwise until the number required for the type of module being
installed aligns with the notch in the base.
2. Make certain the DIN-rail locking screw is in the horizontal position.
(You cannot insert the module if the locking mechanism is unlocked.)
3. Insert the module straight down into the mounting base and press to
secure. The module will lock into place.
Turn the keyswitch to align
the number with the notch.
Notch position 1 is shown.
Be sure the DIN-rail
locking screw is in the
horizontal position.
44228
44710