Rockwell Automation 1746-INT4 Thermocouple/mV Isolated Input Module Quick Start - Manual (Page 4)

4 Thermocouple/mV Isolated Input Module
Publication 1746-QS002B-EN-P - July 2002
How to Get the Related User Manual
The following table describes the related user manual that is available for this
module. To order a copy or to view or download an online version, visit The
Automation Bookstore at: www.theautomationbookstore.com
Unpack the Module
Unpack the module making sure that the contents include:
•
module (catalog number 1746-INT4)
•
factory-installed removable terminal block with CJC sensors attached
(catalog number 1746-RT32)
•
this Quick Start document (publication number 1746-QS002B-EN-P)
If the contents are incomplete, contact your local Rockwell Automation
representative for assistance.
Review Power Requirements
Review the power requirements of the modules drawing power from the chassis
power supply.
1. The fixed 2-slot chassis supports 2 1746-INT4 modules. If combining an
INT4 module with a different type of module, refer to Considerations for a
Fixed Controller in Chapter 3 of the user manual.
2. For a modular system, compute the total load on the system power supply
using the procedure described in the SLC Installation and Operation Manual
for Modular Controllers (publication number 1747-UM011) or the SLC 500
Family System Overview (publication 1747-SO001).
For more detailed information about: See this document: Publication number:
Installation, configuration, programming,
diagnostics and troubleshooting Thermocouple.mV Isolated Input
Module User Manual 1746-6.16
TIP
For more detailed information on these procedures, refer to
Chapter 3 (Installation and Wiring) and Appendix A
(Module Specifications) of the user manual, publication
1746-6.16.