Rockwell Automation 1746-INT4 Thermocouple/mV Isolated Input Module Quick Start User Manual
Page 6
Advertising
6 Thermocouple/mV Isolated Input Module
Publication 1746-QS002B-EN-P - July 2002
2. Align the circuit board of the thermocouple module with the card guides
located at the top and bottom of the chassis.
3. Slide the module into the chassis until both top and bottom retaining clips
are secured. Apply firm even pressure on the module to attach it to its
backplane connector. Never force the module into the slot.
4. Cover unused slots with the card slot filler, catalog number 1746–N2.
5. To remove, press the releases at the top and bottom of the module, and slide
the module out of the chassis slot.
card guides
top and bottom
releases
retaining clips
Advertising