Rockwell Automation 2706-DXX Dataliner Message Display DL5 Series - Manual (Page 10)

2706-UM001A-US-P
P-2 Using this Manual
Intended Audience No special knowledge is needed to enter or edit messages. However, since
the Dataliner message display must be connected to peripheral equipment,
you should be familiar with computer communication terminology.
Conventions The following conventions are used:
•
Messages displayed on the DL5 are shown inside a rectangular box.
•
A symbol or word in brackets represent a single key that you should
press. These include keys such as [A] or [Retrn].
•
Since the DL5 can be programmed with a variety of terminals, the
printing on your terminal keyboard may be different than the symbol or
word indicated in brackets. In this manual, we use [Retrn] to specify the
carriage return function of the keyboard. On your keyboard this may
correspond to the [Enter] or [ ] keys.
•
Angle brackets, < >, are used when you are to enter variable data. For
example, <message number>, means you are to enter a message number
at that point.
•
In the following chapters, we refer to the Dataliner DL5 Series Message
Display as the DL5.
13 Maintenance and
Troubleshooting Provides general maintenance instructions.
Also provides instructions on solving some
of the most common operating problems.
14 Specifications Electrical, mechanical, environmental
specifications
Appendices, Glossary, Index
Chapter Title Purpose
(',7"