BBE DS48 - Manual (Page 25)

19
GRAPHICAL USER INTERFACE (GUI)
The BBE SYSOMAX software provides a graphical method of creating and
editing programs on the DS48. It can also be used to make changes in real
time, if adjustments are required during live operation. Full metering and
control of all settings is available on the PC.
Because it provides a more graphic and overall view, this method will allow
you to program settings more efficiently than using the front panel naviga-
tion method on the DS48.
Though the DS48 stores up to 30 programs, a virtually unlimited number
can be written and stored on a computer with the software installed.
Programs can be created whether or not the computer is connected to the
DS48 processor. However, it must be connected to write or modify pro-
grams to the on-board memory of the DS48 itself.
All the functions available onboard the unit are duplicated in the software.
8.1 MINIMUM SYSTEM REQUIREMENTS
Your SYSOMAX software has the following minimum system requirements for operation:
•Microsoft Windows 98, ME, NT4, 2000, or XP.
•Personal computer with Pentium 2 or higher processor.
•20 megabytes (MB) of free hard disk space.
•64 MB RAM.
•Computer RS-232 serial port for connecting the DB-9 type serial programming cable to
the computer (if your computer only has USB ports, adapters are commonly available.)
•DB-9 type serial cable for connecting the device to the computer. This cable is included
with the unit. Should it become lost or damaged, replacement cables are available at
electronics and computer supply stores.
8.2 INSTALLING SYSOMAX ON YOUR COMPUTER
To install SYSOMAX from the CD-ROM:
1. Insert the CD-ROM into the computer’s CD-ROM drive.
2. Select My Computer from the Desktop or Start menu.