BBE DS48 - Manual (Page 32)

26
CREATING A PROGRAM
®
9.2 DELAYS:
Clicking the Delays tab will open the
Delays window. There is a text box for
each output and a display Units selector.
The Units selector gives you a choice of
whether the delay is expressed in mil-
liseconds, feet or meters. Use the
up/down arrows to select the incremen-
tal values for each output and click OK
when finished.
9.3 LIMITERS:
Set the desired value for each of the four
parameters per Output channel. Note
that Hold Time and Decay select is in 10
ms increments. If using the computer
connected to a unit in real time with pro-
gram material, the meters on the com-
puter screen will mirror those on the
unit’s front panel. This provides remote
monitoring of the signal levels.