BBE DS48 - Manual (Page 26)

20
GRAPHICAL USER INTERFACE (GUI)
®
3. Click on BBE (D) (CD-ROM drive is usually drive D)
4. Double click on the file that then displays: DS48Setup_v13.exe
5. The Setup Wizard screen will appear.
6. Follow the prompts displayed on the screen to install the program.
7. When the installation is complete, eject the CD-ROM
8.3 STARTING UP SYSOMAX
To create a preset program on a DS48 unit , first connect it to the computer with the seri-
al cable. If your computer only has USB ports, adapters are available from computer sup-
pliers.
NOTE: Alternatively, you can start SYSOMAX and create a program offline, without con-
necting to the unit. Always remember to save your programs. To upload the program to
the unit, you must then connect the cable between the unit and the computer.
After the connection is made you can start up SYSOMAX™ by using the Start menu on
your Windows desktop, or by using Windows Explorer or My Computer.
8.3.1 From the Start menu:
1. On the Windows taskbar, click the Start button.
2. From the Start menu, select Programs, then DS48. Then click on the next DS48
icon that appears.
8.3.2 From Windows Explorer or My Computer:
Use Windows Explorer or My Computer to navigate to the folder in which SYSOMAX
resides, then double-click the SYSOMAX.exe icon, or highlight it and press ENTER.
Once you have started the program, you can choose to either operate the program
online or offline to the unit. To exit the program, click the SYSOMAX Exit button in File
menu of the title bar.
8.4 Navigating SYSOMAX
1. When the program starts, the main screen will be displayed. This is a flow chart of the
various signal paths and processes.
2. You can select items from the drop down menus, the icons on the Toolbar or by click-
ing on one of the flow chart boxes.