BBE DS48 - Manual (Page 35)

29
CREATING A PROGRAM
9.6 Parametric Equalizers:
The next set of text boxes provides Frequency, Gain and Q setting choices for five bands of
parametric equalization (PEQ) per output channel. There is also a check box for Flat, which
will bypass the settings for that particular filter. In a similar manner to the Crossover filters
above, clicking on any text box will open the PEQ filter settings window. Use the sliders to
select values for Frequency Q and Gain (cut/boost). An additional check box for FLAT will
bypass all value selections.
At the bottom of the screen are forward and back arrows to step through the five PEQ’s.
Gain must be set to 0 (zero) to select a different type of filter including the Hi or Low Shelf fil-
ter. Gain must remain at 0 for the shelving filters. Click the Set 0dB button to move the Gain
slider to 0 dB or move the slider. If Low Shelf is selected and the Gain is moved to a setting
other than 0, the shelving filter will be disabled and the screen functions will “grey out”.
To adjust the gain for Input A, use your pointing device (mouse, touchpad, etc.) to position the
cursor over the box.
NOTE: Whatever program settings are current will be what is saved as the program, unless a
different program is recalled.