Autocue QMaster Complex - Manual (Page 37)

QMaster Comple Language-UserGuide.docx 2012-10-02
37
© 2003-2011 Autocue Group Ltd.
2. Click More Settings to display the dialog illustrated below.
3. Select an action for the shuttle from the list in the Shuttle Wheel Action field.
4. To adjust the speed of the shuttle from the default, enter values in the seven boxes. Each
box represents the desired speed at the various wheel positions.
5. Select an action for the jog control from the Jog Wheel Action list.
6. Click OK to return to the Configure Scroll Control dialog.
7. Click OK to save and implement the changes made and return to the QPro primary
interface.
Scrolling with the shuttle
Different scrolling speeds can be set for each of the speed increments. The speed increments reflect how far the
scrolling wheel is turned. For example, when the scroll wheel is turned fully to the right, typically for fast-
forwarding through a script, the scroll wheel is on speed increment 7. A slight turn would be a lower speed
increment of 1 or 2.
The values displayed in the screen are default values. 45 and 50 at speed increment 5 and 6 represent the average
reading speed. Typically, the scroll speed increases as the wheel is turned further.
Using the shuttle for controlling scroll speed is particularly advantageous if you have to scroll through long scripts,
and where there is the need to thoroughly check the content of the same script, particularly during a rehearsal. The
shuttle allows you to scroll backwards and forwards, as well as “fast-reverse” and “fast-forward” to different points
of a script.
The speed increments allow you to alter reading speeds, where you can set low and high values at the different
speed increments. Changing speed increments is particularly useful as it allows you to synchronize your reading
speed with the reading speed of the presenter.
Removing your hand returns the shuttle to the centrecenter position and stops scrolling.
Scrolling with the jog control
If you assign to scroll control to the jog, you can also choose one of the following settings: