Autocue QMaster Complex - Manual (Page 64)

QMaster Comple Language-UserGuide.docx 2012-10-02
64
© 2003-2011 Autocue Group Ltd.
To prevent damage in transit, QBoxes are shipped with the aerial detached. Before switching on the power to the
QBox ensure the aerial is securely fastened to the socket on the front of the unit.
Note: The aerial must be attached when operating a QBox. Operation of the unit without an
aerial will result in damage to the wireless interface and will void your warranty.
Wireless connections can be either be via an access point to your existing network infrastructure or set up as a
standalone network between a computer running the QMaster software and one or more QBoxes.
Wireless performance can be affected by many factors, including the nature of surrounding buildings, other
networks in operation and atmospheric conditions.
Configure QBox for a wireless access point
1. Access the network connection configuration interface as outlined earlier in this section.
2. Use the arrow keys on the keyboard to select wlan0 and press Enter to display the tabs
containing controls for setting the wireless network parameters.
3. Press the Tab key to highlight Infrastructure (via access point) Mode and press the Space
bar on the keyboard.
4. Press the Tab key and enter the ESSID of your WiFi network. Contact your IT
department to obtain the necessary information for your network.
5. Hold down the Ctrl key and press the Page Down key to open the WiFi Security tab.
6. Press the Tab key and highlight the WEP option and press the Space bar on the
keyboard.