Autocue QMaster Complex - Manual (Page 65)

QMaster Comple Language-UserGuide.docx 2012-10-02
65
© 2003-2011 Autocue Group Ltd.
7. Press the Tab key until the WEP Key field is highlighted and enter the required key. This
is usually a string of 26 alphanumeric characters.
Note: Take care when entering the key as you must enter the same key for any device that will
be connected to the QBox.
8. Press the Ctrl and Page Down keys to select the IPv4 Settings tab and the DNS Settings
tab.
9. The options selected for the IPv4 and DNS settings should match those entered when
configuring the network connection of the computer running the QMaster software.
10. Press Return on the keyboard to save your wireless network access settings.
11. Close the configuration interface on your QBox.
If the computer you are using to communicate with the QBox has already been configured you can begin loading
information and prompting scripts remotely.
You will need to check in QMaster that the QBox connection has been established.
Select Prompt >> QBox Status Panel and ensure that the QBox is connected and, if there are more than one, at least
one appears as Master.
Configure QBox for wireless peer-to-peer connection
Access the network connection configuration interface as outlined earlier in this section.
1. Use the arrow keys on the keyboard to select wlan0 and press Enter to display the tabs
containing controls for setting the wireless network parameters.
96. Press the Tab key to highlight Ad-Hoc (peer-to-peer) Mode and press the Space bar on
the keyboard.
97. Press the Tab key and enter the ESSID of your WiFi network. Contact your IT
department to obtain the necessary information for your network.
98. Use the keyboard arrow keys to access the WiFi Security tab.
99. Press the Tab key and highlight the WEP option and press the Space bar on the
keyboard.
100. Press the Tab key until the WEP Key field is highlighted and enter the required key.
This is usually a string of 26 alphanumeric characters.
101. Take care when entering the key as you must enter the same key for any device that
will be connected to the QBox.