Autocue QMaster Complex - Manual (Page 8)

QMaster Comple Language-UserGuide.docx 2012-10-02
8
© 2003-2011 Autocue Group Ltd.
8. Press the Tab key to highlight the Subnet Mask field. QBox stores this value as a two-
digit number. The most common Subnet Mask is 24 which corresponds to a Mask
address of 255.255.255.0
Note: Further information about subnet mask numbering can be found in the section “Assigning
static IP addresses” later in the manual.
9. In a direct connection via an Ethernet Switch a Default Gateway should not be
necessary.
10. Press the Tab key to highlight the OK button and press Enter.
11. Press F10 to close the network configuration interface.
12. Use the arrow keys to select Return to Prompt Mode and press Enter.
You can now start the QMaster software and connect the software to your QBox and start prompting your scripts.
Connect QMaster to your QBox
Plug the dongle into your computer and double-click on the QSeries Prompter icon on your computer desktop to
display the primary user interface.