Autocue QMaster Complex - Manual (Page 58)

QMaster Comple Language-UserGuide.docx 2012-10-02
58
© 2003-2011 Autocue Group Ltd.
71. If you are connecting a VGA monitor check the screen resolutions of your monitor or
prompter and select the appropriate VGA setting.
72. When you have selected your display mode press the Ctrl and Page Down key to display
the Outputs page.
73. Press the Tab key to select OK and then the Space key or Enter key to confirm your
selections.
Note: If neither output is selected a warning message will be displayed because at least one
must be selected.
74. Press the Tab key to highlight OK and press Enter.
75. Press F10 to close the network configuration interface.
76. Use the arrow keys to select Return to Prompt Mode and press Enter.