Bang & Olufsen BeoVision Avant - User Guide User Manual
Page 10
10
>> Understanding the guide
Select source …
You can bring up a source by pressing the TV
or MUSIC button and select a source in the
remote control display, or you can select a
source via the television menu.
Bring up the main menu
Select SOURCE LIST
Select a source
Bring up help texts …
You can bring up help texts with
explanations of features and functions when
available in menus and submenus.*
1
General
features and functions are also explained in
the NICE TO KNOW menu.*
2
Bring up the main menu
Bring up the SETUP menu
Select an option
Show or hide help texts
1
*For some languages, help texts are only
available in English.
2
*Access the NICE TO KNOW menu from the
SETUP menu. You can read about basic
features and functions. When your television
receives software updates (requires Internet
connection), new features and functions will
be explained here.
Indicator light
Standby indicator
The standby indicator placed to the right on
top of the television screen will provide you
with information about the television state.
(Solid green)
The TV is switched on, but there is no picture
on the screen.
(Slowly flashing red)
The TV has been disconnected from the
mains supply and you must enter the pin
code.
See page 70 for more information on
.
(Quickly flashing red)
Do not disconnect the TV from the mains
supply. Could be due to new software being
activated or too many failed pin code
attempts.
MENU
MENU
INFO