Bang & Olufsen BeoVision Avant - User Guide - Manual (Page 74)

74
>> Network settings
Make a wireless connection
If your router has the WPS feature (wireless
protected setup), you can make a wireless
connection to your network automatically.
You can also make the connection manually.
It is assumed that you have enabled the
DHCP service on your network and that the
SSID is not hidden.
Connect to a wireless network
automatically …
> Press the centre button to bring up the
WLAN SETTINGS menu and highlight
WLAN.
> Press the WPS button on your router to
activate the WPS feature.
> Press or to enable wireless LAN and
store the setting.
> Press to highlight WLAN PROTECTED
SETUP and press the centre button to
bring up the menu. Here you can see a
status of the wireless connection. When
CONNECTED is shown on the screen, your
television is configured correctly on your
network.
> Press the centre button to return to the
NETWORK menu.
Connect to a wireless network manually …
> Press the centre button to bring up the
WLAN SETTINGS menu and highlight
NETWORK LIST.
> Press the centre button to bring up the
NETWORK LIST menu.
> Press the yellow button if you wish to
refresh the list of networks.
> Press or to highlight a network router
and press the centre button to be able to
enter the password.
> Use , , and to enter the password to
your wireless network and press the
centre button to establish a connection.
When CONNECTED is shown on the
screen, your television is configured
correctly on your network.
> Press the centre button to return to the
NETWORK menu.
Check your wireless network signal …
> Bring up the NETWORK INFO menu and
highlight ADVANCED INFO (WLAN).
> Press the centre button to bring up the
ADVANCED INFO (WLAN) menu.
> Check the signal strength in the LEVEL
menu:
***** Excellent connection
**** Very good connection
*** Good connection
** Stable connection
* Unstable connection
Note that your television must be connected
wirelessly to access this menu.
For more information about your router, see
the guide for it.
Your television supports 2.4 GHz and 5 GHz.
For more information, contact your Bang &
Olufsen retailer.
MENU
SETUP
NETWORK
NETWORK SETTINGS
…