Bang & Olufsen BeoVision Avant - User Guide - Manual (Page 50)

50
In the SOURCE LIST menu, you can, for
each source, press the
red button and set
up a picture format to be used each time
you activate this source. You can also select
a different picture format temporarily.
To activate picture formats
directly …
Press to bring up FORMAT in
the BeoRemote One display
Press to select a picture format
Step between formats
Move the picture, if possible
Press to remove FORMAT from
the display
Note that you cannot change picture format
when a source shows a UHD signal.
For information about setting up additional
equipment, see page 23
.
>> Adjust sound and picture settings
Picture format
LIST
FORMAT
1 – 6
BACK