Bang & Olufsen BeoCenter 2 - User Guide - Manual (Page 13)

Make your music system start and stop automatically
You can make the music system start
or stop playing at designated times
throughout the day and week.
The music system remembers up to 8
such Timers. Set one to wake you up
in the morning to the sound from
either your favourite CD or radio
program and another to switch the
music system to standby at a specific
time in the evening, or make
individual Timers for workdays,
weekends and holidays.
You can name your Timers for easy
recognition and switch each of your
Timers on or off individually.
You can change your Timers at any
time.
To enter the TIMER menu, press LIST, enter the
SETUP menu and then enter the TIMER menu.
What’s on the TIMER menu …
ON/OFF … Use this menu to activate or
deactivate each of your programmed Timers.
SOURCE … Use this menu to select a source for
your programmed Timer. If you select radio as
your Timer source, select a program number
too.
START/STOP … Use this menu to enter the start
and stop times of your Timer.
DAYS … Use this menu to select which specific
days of the week, this Timer should be
activated.
NAME … Use this menu to name your different
Timers for easy recognition.
Useful hints …
To stop the music system, make a Timer with
standby as the source.
If you set a Timer for Monday, Tuesday and
Thursday, the Timer will be repeated on these
days only, every week.
If you have connected the music system to a
Bang & Olufsen television or radio with Timer
function, you must enter your Timer settings on
the television or radio, as described in its Guide. If
you want these settings to apply to BeoCenter 2
as well, you must activate the Timer function on
BeoCenter 2, as described on page 15.
If you want to make use of the Timer function, it
is necessary that the built-in clock in the music
system is set correctly. For further information,
refer to page 15.
1 ON/OFF
2 SOURCE [SOURCE, PROGRAM]
3 START/STOP
4 DAYS
5 NAME
. . TIMER
1 TIMER 1
…
8 TIMER 8
13