Bang & Olufsen BeoCenter 2 - User Guide - Manual (Page 8)

First-time setup
Once your music system is installed
and switched on for the first time,
you are guided through the first-time
setup procedure. The first time setup
consists of:
– Menu language selection
– Auto tuning of radio programs
– Setting the time and date
– Adding to the list of sources and
functions which appear in the
display when you press LIST
– Setting display preferences
The FIRST-TIME SETUP menus appears
automatically when you switch the system on for
the first time.
What’s on the FIRST-TIME SETUP menus …
SELECT LANGUAGE … Select your preferred
language for the menus in the display from the
list of available languages.
AUTO TUNING … Let the music system tune in
all available FM and DAB* radio programs for
you.
SET CLOCK … Set the built-in clock to the correct
time and date.
LIST OPTIONS … Add sources, functions and
menus to the list which appears in the display
when you press the LIST button.
DISPLAY SETUP … Select the display reading,
you prefer for radio, CD and status respectively.
Useful hints …
All the settings you make during first-time setup,
can be changed via the OPTIONS menu at any
time. For further information on the OPTIONS
menu, refer to page 15.
If your music system is connected to a Bang &
Olufsen television or radio with clock function,
the SET CLOCK menu does not appear. You set
the clock via the television or radio.
…
1 SELECT LANGUAGE …
2 AUTO TUNING
3 SET CLOCK …
4 LIST OPTIONS …
5 DISPLAY SETUP …
8
*NOTE! DAB (Digital Audio Broadcast) radio
programs are only available if they are broadcast
in your area and your music system is equipped
with the built-in DAB module. For further
information about tuning DAB programs, refer to
the chapter ‘Tune in and edit radio programs’ on
page 10.