Bang & Olufsen BeoCenter 2 - User Guide User Manual

Page 27

Advertising
background image

Technical specifications, features and the use

thereof are subject to change without notice.

The black and yellow label on the compact disc

player serves as a warning that the apparatus
contains a laser system and is classified as a class 1
laser product. In case any difficulties arise with

the compact disc player, please contact a Bang &
Olufsen retailer. The apparatus must be opened

by qualified service personnel only.

CAUTION: The use of any controls, adjustments or

procedures other than those specified herein may
result in hazardous radiation exposure.

This product incorporates copyright protection

technology that is protected by U.S. patents
4,631,603; 4,577,216; 4,819,098; 4,907,093; and
6,516,132 and other intellectual property rights.
Use of this copyright protection technology must

be authorized by Macrovision, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.

The DVD Video logo is a registered trademark.

This product fulfils the conditions stated in the

Directives 89/336/EEC and 73/23/EEC.

For the US-market only!

NOTE: This equipment has been tested and found
to comply with the limits for a class B digital
device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a
residential installation.

This equipment generates, uses and can radiate

radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct

the interference by one or more of the following
measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment

and receiver.

– Connect the equipment into an outlet on a

circuit different from that to which the receiver
is connected.

– Consult the dealer or an experienced radio/TV

technician for help.

For the Canadian market only!

This class B digital apparatus meets all require-

ments of the Canadian Interference-Causing
Equipment Regulations.

CLASS 1

LASER PRODUCT

Manufactured under license from Dolby

Laboratories. “Dolby” and the double-D symbol

are trademarks of Dolby Laboratories.

Confidential unpublished works.

Copyright 1992–1997. All rights reserved.

3507666

0702

Advertising