Bang & Olufsen BeoCenter 2 - User Guide - Manual (Page 21)

Display … The display menu allows you to select
the language of the DVD player menus, to decide
whether or not operation displays should be
shown on the screen, and whether the angle
indicator should be shown. The angle indicator
is only available if the disc contains the alternate
camera angle feature.
Options … Some DVDs feature a Parental Lock
level. If you specify a level lower that the one
contained on the disc, the disc will not play,
unless your pincode is entered. Some discs also
support the Country Code feature. This means
that the player does not play certain scenes on a
disc, depending on the Country Code and the
Parental Lock level you set. Before you can set
the Parental Lock level or the Country Code, you
must enter a pincode. You can change the
pincode at any time.
If you forget your pincode, you must enter the
DVD OPTIONS menu and reset the PARENTAL
LOCK. The function is then deactivated. The
DVD OPTIONS menu is described to the right.
DivX VOD is used for video on demand. Use the
menu to generate a DivX VOD registration code
which you submit to your provider. Contact your
DivX VOD provider for further instructions.
The DVD OPTIONS menu on
BeoCenter 2 …
It is necessary to enter the following settings
in the DVD OPTIONS menu on BeoCenter 2.
For further information, refer to page 15.
What’s on the Disc Navigator menu
The Disc Navigator menu allows you to quickly
step to specific titles or chapters on a disc.
SCART SENSE OUT … If your system is
connected directly to a television from the
BeoVision MX-series (that is 4000/4002,
6000/7000), an AV 9000, or to a Bang &
Olufsen television without a 21-pin SCART
socket, choose OFF.
If your system is connected to a BeoVision MX
via an AV 2 Expander box, or if it is connected
to any other Bang & Olufsen television, choose
ON.
DVD SOUND … If you want DVD sound via the
speakers connected to the music system, choose
PL/SCART.
If you want DVD sound via the television speakers
only, choose SCART, even if your television has
no 21-pin SCART socket.
SCART VIDEO OUT … If your system is connected
to an AV 9000, BeoVision LX, BeoVision MS or
BeoVision MX 4000/4002/6000/7000 television,
choose CVBS.
If your system is connected to a BeoVision Avant
50 Hz television, or to a Bang & Olufsen television
without a 21-pin SCART socket, choose Y/C.
If your system is connected to any other tele-
vision, choose RGB/CVBS.
PARENTAL LOCK … If you have forgotten your
DVD pincode or you wish to reset the code,
enter this menu and select YES.
Disc Navigator
Title
Chapter
21