Bang & Olufsen BeoCenter 2 - User Guide - Manual (Page 15)

Make option settings
You can change the basic settings of
your music system to your liking. The
OPTIONS menu allows you to set the
clock, switch the Timer function on
or off, set DVD options* or choose
language.
You can also set your preferences for
the display and select the sources
and functions which should appear
when you press the LIST button.
To enter the OPTIONS menu, press LIST, enter the
SETUP menu and then enter the OPTIONS menu.
What’s on the OPTIONS menu …
SET CLOCK … Use this menu to set the built-in
clock to the correct time and date. – This menu
only appears if your music system is not
connected to a television.
ACTIVATE TIMER (ON/OFF) … Use this menu to
switch the Timer function on or off. Select ON
to include speakers connected to the music
system in a Timer.
SELECT LANGUAGE … Use this menu to select
your preferred language for the texts in the
display from the list of available languages.
DISPLAY SETUP … Use this menu to select the
type and amount of display information for
radio and CD. The settings for RADIO and CD
determine what is shown at the top of the
display, such as radio text, or a CD name. The
setting for STATUS determines whether display
information is shown temporarily – that is,
during use of the close-up operation panel – or
permanently.
LIST OPTIONS … Use this menu to add functions,
features and menus to the list which appear
when you press LIST.
DVD OPTIONS … Use this menu to select
settings for DVD. For further information, refer
to page 21.*
Useful hints …
From the factory, the only menu entry available
when you press LIST is SETUP.
If you change the STATUS DISPLAY from DEFAULT
to EXTENDED, the information, which is otherwise
only briefly shown in the display, will be shown
continuously.
You can call up the time in the display. Press the
LIST button on BeoCenter 2 and select
SHOW CLOCK, or press the LIST button on the
Beo4 remote control and select CLOCK.
When the system is connected to a Bang &
Olufsen television or radio, you must set the clock
as described in the Guide for the television or
radio.
When your music system is connected to a
television, Timers are programmed via the
television, but if you want them executed on
BeoCenter 2, you must set the ACTIVATE TIMER
menu to ON. This requires that you have
connected speakers to BeoCenter 2.
If by accident, you have chosen a language you do
not want, you can enter the language menu by
pressing LIST, move down to the last menu entry,
press , then press 5 and then 3.
*Appears in the menu only if your BeoCenter 2 is
equipped with DVD.
1 RADIO
2 CD
3 STATUS [DEFAULT/ EXTENDED]
1 SCART SENSE OUT
2 DVD SOUND
3 SCART VIDEO OUT [RGB/CVBS …]
4 PARENTAL LOCK
. . OPTIONS
1 SET CLOCK …
2 ACTIVATE TIMER [ON/OFF]
3 SELECT LANGUAGE …
4 DISPLAY SETUP …
5 LIST OPTIONS [N.MUSIC …]
6 DVD OPTIONS …
15