Bang & Olufsen BeoCenter 2 - User Guide - Manual (Page 14)

Make sound settings
All sound levels are set to neutral
values from the factory, but you can
make your own sound adjustments
and store them.
You can adjust the volume, bass and
treble levels, or alter the balance
between the left and right speaker.
If you store a volume level, your
music system starts playing at this
level every time you switch it on.
The music system also features a
loudness function which you can
activate or deactivate. The loudness
function makes the music more
dynamic. It compensates for the
human ear’s lack of sensitivity to high
and low frequencies when listening
to music at low volume.
To enter the SOUND menu, press LIST, enter the
SETUP menu and then enter the SOUND menu.
What’s on the SOUND menu …
PRESET VOLUME … Use this menu to preset a
volume level for your music system. The maxi-
mum volume level that can be stored in this
menu is 75.
ADJUST BALANCE … Use this menu to adjust
the balance between your speakers.
SET TONE (BASS, TREBLE, LOUDNESS) … Use
this menu to adjust bass and treble to your
liking and switch the loudness feature on or off.
Useful hints …
If you do not store the sound adjustments you
make, the music system will return to the preset
sound levels once you switch it off.
Volume level can always be adjusted via the close-
up operation panel or the Beo4 remote control.
When the music system is connected to a Bang &
Olufsen television, sound must be adjusted as
described in the Guide for the television.
. . SOUND
1 PRESET VOLUME
2 ADJUST BALANCE
3 SET TONE [BASS, TREBLE, LOUDNESS]
14