Bang & Olufsen BeoCenter 2 - User Guide - Manual (Page 5)

Socket for headphones
When headphones are plugged in, the speakers, connected to your
music system, are muted.
Loading a disc …
Press LOAD to open the disc compartment.
When the disc compartment is open, load the disc* with the label
facing you.
Press LOAD again to close the disc compartment or just press DISC to
play the loaded disc. Note that depending on the status of the audio
system, this may take a while.
*Make sure you place the disc inside the area created by the four guide
tabs! If the disc is placed on top of one or more of the tabs, the loader
can not retract and close properly. This may cause damage to the
system or to the disc.
The status display …
The extended status display is not switched on
permanently. Only the first line is displayed all the
time. When you operate the music system, the
display shows additional information, such as
track time and CD name briefly. If you change the
display setting to EXTENDED, the display always
shows current status and additional information.
For further information, see page 15.
Indicator light …
The indicator light below the display flashes when
you touch a button. The light shines continuously
when the music system is in standby.
GO
4
5
6
7
8
9
1
2
3
0
RADIO
DISC
LOAD
LIST
EXIT
LOAD DISC
CD TRACK 11 / 12
CD TRACK 11 / 12
2:18
GLENN MILLER
REPEAT RANDOM EDIT
5
NOTE! BeoCenter 2 can also be operated with the
Beo4 remote control. For further information,
refer to page 22.