Calculated Industries 5025 - Manual (Page 20)

18 — ElectriCalc LT
Memory Functions
Whenever the [M+] key is pressed, the
displayed value will be added to mem-
ory. Other memory functions:
Function Keystrokes
Subtract from memory [Set] [M+]
Recall total in memory [Rcl] [M+]
Display & clear memory [Rcl] [Rcl]
Clear memory, no display [Set] [Rcl]
Replace memory with
displayed value [Set] [Rcl] [M+]
The memory is semi-permanent; it will
be cleared when you:
1) turn off the calculator;
2) press [Rcl] [Rcl];
3) press [Set] [Rcl];
4) press [Set] [x] (all clear).
How To Use Memory Functions:
Steps Keystrokes Display
Add to M+ 355 [M+] 355.
Add to M+ 255 [M+] 255.
Recall total M+ [Rcl] [M+] 610.
Sub. from M+ 745 [Set] [M+] 745.
Recall & clear [Rcl] [Rcl] – 135