ClearCube Grid Center Admin Guide 4.11 - Manual (Page 14)

8 • Grid Center Installation Grid Center 4.11 Administrator’s Guide
Note: Verify the versions of your installed components, and uninstall outdated
versions before beginning to install Grid Center.
In all cases, allow the installer adequate time to complete its operation. The
ClearCube All-in-One installer appears to pause at several times during its execution,
while showing no obvious activity. The installation resumes within several seconds,
and displays a dialog box with information or more instructions.
Installing the Grid Center Administration Console
If you have a Grid Center 4.0 installation, remove it before installing Grid Center 4.11.
If you have a Grid Center 4.1 installation, do not remove or re-install Grid Center.
Instead, go to the Installing the Linux Console Update procedure on page 9.
Install the Grid Center Administration Console using the All-in-One installer on the
Grid Center CD. Installation requires local administrator access privileges.
1. Double-click the setup.exe icon on the Grid Center 4.11 installation CD.
2. Choose the components to be installed from the Select Features window (see
Figure 1). Press Next.
3. When prompted, choose the users who see the Grid Center installation by
selecting “Anyone who uses this computer (all users)” or “Only for me
(username).” This can be changed later. See Modifying User Access to the
Administration Console on page 38.
4. Select Grid Center Administration Console from the Setup Type screen
(see Figure 2). Press Next.
Figure 2 Setup Type
5. Accept the default settings as the InstallShield Wizard runs. Press Next when
necessary.
6. Follow the prompts as appropriate.