ClearCube Grid Center Admin Guide 4.11 - Manual (Page 51)

Grid Center 4.11 Administrator’s Guide Allocation • 45
choice is None. However, you can add or modify a Blade group and designate
it as a Spare group, and change the I/Port group spare mapping later.
3. Press Save or Add Group and confirm this action. The new I/Port group is
saved in the database and the group name is added to the I/Port Group
pull-down menu at the right end of the menu bar.
An I/Port group can be modified at any time by selecting its name from the I/Port
Group pull-down menu in the Group Edit View — I/Port Groups screen.
To delete an I/Port group, select it from the I/Port Group pull-down menu and press
the Delete button in the lower right corner of the screen. You will be prompted to
confirm the deletion.
Adding I/Ports to an I/Port Group
Figure 24 shows an unpopulated I/Port group. To add I/Ports to a new or existing
I/Port group, do the following:
1. Select the I/Port Group from the I/Port Group pull-down menu at the right end
of the menu bar.
2. Click on an I/Port name or icon in the left pane. The I/Port is shown in the right
pane, and is added to the database.
3. Click Save.